For a perfect finish and high shine repeat the process with our ZERO SWIRL polish.

• Easily removes P2000 marks
• Designed for Ceramic and Scratch resistant Clearcoat
• Excellent for final finish on Gelcoat
• Free of silicone, wax or glaze
• Colour coded to match the appropriate Turquoise foam
• No filler: Removes problems rather than hide them
• Water based
• Designed for all types of paints
• High Gloss (91 gloss units)
• No splattering
• Works at low speed (up to 1800 rpm)
• No water needed (but can be used with it)
• To be used on fresh or fully cured paints
• Can be used with foam and wool pads
• Free of Silica for better health and safety
• Doesn’t mark plastics
• Biodegradable

To be used on a clean and properly cured surface, avoiding hot surfaces and direct sunlight. Use with our blue medium compounding foam (AP015) on an electric or air-fed polisher at approximately 1800 RPM. Apply a small quantity of FINE CUT onto the foam pad, place the foam onto the surface to be rectified and start the machine, moving the polisher in a circular motion.
Clean the surface with our soft polishing cloth (40535) once the operation is finished.

Quickly removes marks from P2000 sanding papers and moderate oxidation.
HOW TO USE:To be used on a clean and properly cured surface, avoiding hot surfaces and direct sunlight. Use with our blue medium compounding foam (AP015) on an electric or air-fed polisher at approximately 1800 RPM. Apply a small quantity of FINE CUT onto the foam pad, place the foam onto the surface to be rectified and start the machine, moving the polisher in a circular motion.Clean the surface with our soft polishing cloth (40535) once the operation is finished.For a perfect finish and high shine repeat the process with our ZERO SWIRL polish.

This item is 12 x LP110